DIY Pool Fencing Mistakes to Avoid

Are you considering installing a fence around your swimming pool? Pool fencing is good for several reasons. It adds to the look of your swimming pool. It can also prevent accidents, thus ensuring the safety of children and pets that are around the pool. If you are a DIY person planning to embark on a pool fencing project, then it’s important that you know what you are doing. Pool fencing is tricky, and it must be carried out by a professional pool fencing company in Mesa, AZ. or hot tub moving company. However, if you want to do this on your own then read on as we discuss some of the most common pool fencing mistakes you must avoid at all costs.
 
Let's dive right in.

Mistake#1: Not Considering the Internal and External Factors

When doing a fencing project, the type of fencing matters the most. There are several reasons for this. The first factor affecting your choice of fencing is the local laws surrounding the type of fencing and its positioning. Moreover, you should also check if there are any permits needed to erect fencing around your pool, and whether the local laws require fencing to be done by a professional. Other factors include durability, purpose, and maintenance. It would be best to always go for fencing that is easy to maintain and lasts longer. Skimping on any of the above factors can create a lot of hassle for you in the future.

Mistake#2: Failing to Install the Posts

The posts are the supports on which the fencing stands. If you fail to pull this one off, the whole fencing project will fail. To do this the right way, you must know the different types of posts.
 
The most common type of fencing post is the stout post, also known as the anchor post. They are used at the gates, corners, and curves of the fence. Then, there are line posts installed along the lines of the fence at regular intervals. Anchor posts are thicker, and you must insert them deep into the ground. If not, the fence may fall over. If you need help with this, be sure to seek help from a professional pool fencing company in Mesa, AZ.

Mistakes#3: Incorrect Measurements

We have all heard stories where fencing is removed because it covers other people's property. If you are starting a DIY fencing project, don't skimp on the measurement part. The fencing shouldn't be too close to the swimming pool or too far away. It should be at a reasonable distance, where it serves its purpose, while not encroaching on someone else's land.
Miatake#4: Disruption of Underground Utilities

Before you dig, make sure to figure out the local laws regarding digging. You might be disrupting some underground utilities that you mustn't touch. Sometimes, there is electrical wiring underneath, which can be dangerous if touched. You might also end up affecting someone's electrical supply.
 
If you are looking for a professional fencing company in Mesa, AZ, this is the place for you. For more information, please visit our website today.